INVENTUM HEATER MODEL ‘HIB-01 (3.3 KVA UNIT)

Details

This ‘light-weight’ member of Series HIB, has a power capacity of 3.3 kVA. The controls are based on solid state electronics.

TECHNICAL SPECIFICATIONS

Product Data Model HIB-01
Heater Body Outer casing body of these units is made from Impact Resistant FRP,and coated with special heat and scratch resistant PU Hard Coating.
Power 3.3 KVA
Voltage 1Ø x 230 VAC
Nominal Current 15 A
Working Frequency 50/60 Hz
Residual Magnetism < 2 A/cm
Power Level High 100 % Low 50 %
Temperature Control 60o to 120o C using solid state circuit
Time Control 0.5 to 6.0 min continuous
Minimum (ID)mm 29mm (with standard horizontal yoke)
Sound Signal Yes
Reheat Signal No
Error Signal No
Digital Display No
Coil Over Heating Protection Yes
Temperature Hold Function No
Space between vertical supports (W x H) 100 x 100 mm ( ± 10mm)
Overall Dimensions (W x D x H) 320 x 265 x 240mm (± 10mm)
Standard Horizontal yoke size 20 x 20 x 250mm (suitable for bore dia. 29mm & above)
30 x 30 x 250mm (suitable for bore dia. 43mm & above)
45 x 45 x 250mm (suitable for bore dia. 64mm & above)
Weight (main unit) 26 Kg
Weight with Standard Yokes 33 Kg
OPTIONAL ACCESSORIES  
Horizontal yoke size 10 x 10 x 250mm (suitable for bore dia. 15mm & above)
14 x 14 x 250mm (suitable for bore dia. 20mm & above)
55 x 55 x 250mm (suitable for bore dia. 20mm & above)
Riser Block (Pair) 55×55×120mm
Special Equipment Trolley 690×530×355mm
Handheld Digital Thermometer DT – 01 ( 0 to 500 oC )