Heaters Products

HIB-02 (6 kVA)

This ‘Middle-weight’ from Series HIB, has a power capacity of 6 kVA. Its controls are microprocessor based. It weighs about 47 kg. and can be carried to the site of operation, using special die-cast handles provided on both sides. It can heat typical bearings of 13 kg. and 64 kg. to 110° C in 3 minutes and 20 minutes,respectively.

TECHNICAL SPECIFICATIONS

Product Data Model HIBT - 04
Heater Body Outer casing body of these units is made from Impact Resistant FRP, and coated with special heat and scratch resistant PU Hard Coating.
Power 6 KVA
Voltage 2Ø x 440 VAC
Nominal Current 16 A
Working Frequency 50/60 Hz
Residual Magnetism < 2 A/cm
Power Level Variable & Step less, can be varied in steps of 1% also.
Temperature Control Up to 4000C using microcontroller based circuits, adjustable in
steps of 10C and accuracy +/- 50C (Temperature accuracy +/-50C for all models).
Time Control 0 to 99 min 59 sec.
Minimum (ID)mm 92mm (with standard horizontal yoke)
Sound Signal Yes
Reheat Signal Yes
Error Signal Yes
Digital Display Yes
Coil Over Heating Protection Yes
Temperature Hold Function Yes, Provided
Space between vertical supports (W x H) 190 x 130 mm ( ± 10mm)
Overall Dimensions (W x D x H) 450 x 285 x 300mm (± 10mm)
Standard Horizontal yoke size 65 x 65 x 340mm(suitable for bore dia. 92mm & above)
Weight (main unit) 47 Kg
Weight with Standard Yokes 60 Kg
OPTIONAL ACCESSORIES -
Horizontal yoke size 20 x 20 x 340mm(suitable for bore dia. 29mm & above)
40 x 40 x 340mm(suitable for bore dia. 57mm & above)
50 x 50 x 340mm(suitable for bore dia. 71mm & above)
Special Equipment Trolley 690 × 530 × 355mm
Handheld Digital Thermometer DT-01 (0 to 5000C)