Heaters Products

HIB-04-SPL-V (22-25 kVA)

This Model has the same power capacity as that of HIB-04. In this Model the yoke is also slided vertically by using electric wire rope hoist operated by pendant. This model is specially designed for components of heavier mass which are difficult to handle vertically. These heavy components are slided on to the heater base which is quite easier.

TECHNICAL SPECIFICATIONS

Product Data Model HIB-04-SPL-V
Heater Body Base structure of steel and main heater coil hermetically sealed with fiber glass.
Power 22-25 kVA
Voltage 2Ø x 440 VAC
Nominal Current 60 A
Working Frequency 50/60 Hz
Residual Magnetism < 2 A/cm
Power Level Variable & Step less, can be varied in steps of 1% also.
Temperature Control Up to 400° C using microcontroller based circuits, adjustable in steps
of 1° C and accuracy +/- 5° C (Temperature accuracy +/-5° C for all models).
Temperature Probe Yes, K-type thermocouple provided with magnetic attachment
Time Control 0 to 99 min 59 sec.
Minimum (ID)mm 140mm ( with standard vertical yoke)
Sound Signal Yes
Reheat Signal Yes
Error Signal Yes
Digital Display Yes
Coil Over Heating Protection Yes
Temperature Hold Function Yes, Provided
Temperature Hold Function Yes, Provided
Space between vertical supports (W x H) 440 x 390 mm ( ± 10mm)
Overall Dimensions (W x D x H) 810 x 1250 x 1090mm (± 10mm)
Standard Horizontal yoke size 100 x 100 x 700mm (suitable for boredia.140mm & above)
Weight (main unit) 350 Kg
Weight with Standard Yokes 400 Kg (Aprox.)
OPTIONAL ACCESSORIES -
Vertical yoke size 40 x 40 x 700mm(suitable for bore dia.57mm & above)
50 x 50 x 700mm(suitable for bore dia.71mm & above)
65 x 65 x 700mm(suitable for bore dia.92mm & above)
80 x 80 x 700mm(suitable for bore dia.114mm & above)
Hand held Digital Thermometer DT-01 (Range 0 to 500° C)