Heaters Products

HIBT-08-RC25 (8 kVA)

Inventum Induction Heater Model HIBT-08-RC25 is a specially customized heater meant for faster heating of components. The size of the reduce core is designed as per customer requirement. It is a special workstation type induction heater. It comes with specially designed top enclosure made of transparent PC / Polycarbonate sheets & cover at the top. It provides additional safety to the operator as the heated job is inside the enclosure. This enclosure is provided optionally if specially required by the customer.

TECHNICAL SPECIFICATIONS

Product Data Model HIBT-08-RC25’(with Reduced core of 25mm)
Heater Body Robust all Steel Body
Power 8 KVA
Voltage 2Ø x 440 VAC
Nominal Current 18 A
Working Frequency 50/60 Hz
Residual Magnetism < 2 A/cm
Power Level Variable & Step less, can be varied in steps of 1% also.
Temperature Control Up to 400° C using microcontroller based circuits, adjustable in steps
of 1° C and accuracy +/- 5° C (Temperature accuracy +/-5° C for all models).
Time Control 0 to 99 min 59 sec.
Minimum (ID)mm 64mm (with standard horizontal yoke)
Sound Signal Yes
Reheat Signal Yes
Error Signal Yes
Digital Display Yes
Coil Over Heating Protection Yes
Temperature Hold Function Yes, Provided
Space between vertical supports (W x H) 150 x 70 mm (± 10mm)
Overall Dimensions (W x D x H) 400 x 400 x 1050 mm (± 10mm)
Standard Horizontal yoke size 45 x 45mm
Core Section Sizes 70 x 70 mm
Top vertical core size (Variable as per customer requirement) 25 x 25 mm
OPTIONAL ACCESSORIES -
Handheld Digital Thermometer DT-01 (0 to 500° C)