INVENTUM Mobile Hydraulic Press Series-‘HIPR-100/70’ is a specially designed equipment for Mounting and Dismounting of Cartridge Type Taper Roller Bearing Units (CTRBUs) used in Rolling Stock of Indian Railways on Class ‘ E’ Axle Journal (6’x11′). This unit is a Jack Type (Horizontal) double acting Electric Hydraulic Puller cum installer having pulling (dismounting) force of 100 Tons and installing (mounting) force of upto 70 Tons.
This Equipment is similar to Model ‘HIPR 100/70’ in design & construction, but is incorporated with indigenous hydraulic power-pack of 500 bars capacity with hand operated 3 position 4 way directional flow control valve. This Mobile Hydraulic Press can also be evocatively used for mounting and dismounting of many types of bearings and many other torque transmitting components.
A Main frame with hand operated jacking mechanism to lift and align the Hydraulic Cylinder with the Withdrawal Shoe.
Electric motor driven Hydraulic Power-Pack with controls.
The Power-Pack of the equipment operates on 3 phase-440 volts-50 cycle Electric Power Supply.
Double Hydraulic Cylinder for mounting and dismounting of bearings.
|STROKE HORIZONTAL||400 mm. (+/- 10mm.)|
|CAPACITY||(i) Pull 100 Tons. (ii) Installation 70 Tons.|
|SPEED||(i) Advance 290mm/min.(+/- 10%) (ii) Pull (bearing) 70mm/min.(+/- 10%). (iii) Installation (bearing) 110mm/min.(+/- 10%)|
|TYPE OF CYLINDER||Hydraulic Double Acting|
|HYDRAULIC PRESSURE||500 bars (Working Pressure)|
|HYDRAULIC PUMP||Pump Electrically operated two stage without remote control. Hand operated 4 way 3 position direction flow control Valve for actuation of Hydraulic Cylinder.|
|DELIVERY OF PUMP||1500 cubic cm of oil at full pressure. (i.e.500 bars) 4500 cubic cm of oil at low pressure (i.e.60 bars)|
|HEIGHT FROM FLOOR TO CENTRE OF INSTALLING TUBE||400mm.|