We rely on Inventum for our railway projects. Their robust bearings are not only reliable but have also enhanced the safety and performance of our locomotives. Exceptional service and support
Hydraulic Products
Oil Injection Equipment
The pressure required to dismount bearing assemblies generally is in the 200 to 500 kg/cm2 range; and for torque-transmission joint is in the 800 to 1800 kg/cm2 range. It is only in exceptional cases that a pressure of 2500 kg/cm2 is required. Oil Injector Equipment manufactured by INVENTUM is designed to operate upto 3000 kg/cm2 giving adequate pressure for all normal dismounting applications. Oil injection pump and oil injection equipment manufacturers in Mumbai, India to entire world oils injections pumps, tools and kits for sale from last three decades with multiple industrial features as per the requirements.
Models
(Standard + Customized)
(Standard + Customized)
0
+
Products
0
+
TECHNICAL SPECIFICATIONS
Field of Use :-
This System has a variety of applications; from small components to extremely large ones with cylindrical or taper seats. It is widely used for mounting and dismounting components with interference fits which are transmitting large fluctuating loads, such as gears, flywheels, crankshafts, couplings and bearings. Some advantages of the Oil Injection System in selected areas of applications are illustrated under :
Mounting and Dismounting :-
Oil Injection System is the only method of mounting and dismounting shrunk fit components easily and without damage. The mounting and dismounting force is reduced, or almost eliminated, by using the oil injection method.
Improved torque transmission properties :-
It is possible to transmit very high and fluctuating torques by means of components having interference fit. This eliminates the use of keyways or splines and thus does not limit its torque transmitting properties to the shear factor of the key. Many times it is possible to reduce the shaft diameter to transmit the same torque. No keyways or splines are to be milled, thus also saving machining costs.
| Product Data | Model HIB-01-SPL |
|---|---|
| Power | 3.5 - 4 KVA |
| Voltage | 1Ø x 230 VAC |
| Nominal Current | 15 A |
| Working Frequency | 50/60 Hz |
| Residual Magnetism | < 2 A/cm |
| Power Level | High 100 % Low 50 % |
| Temperature Control | 60° C to 120° C using solid state circuit |
| Time Control | 0.5 to 6.0 min continuous |
| Minimum (ID)mm | 29mm (with standard horizontal yoke) |
| Sound Signal | Yes |
| Reheat Signal | No |
| Error Signal | No |
| Coil Over Heating Protection | Yes |
| Temperature Hold Function | No |
| Space between vertical supports (W x H) | 100 x 100 mm ( ± 10mm) |
| Overall Dimensions (W x D x H) | 320 x 265 x 240mm (± 10mm) |
Get in touch
Contact Us
We’re here to help! Whether you have questions about our products or need support, our team is ready to assist you. Reach out today
Related products
Explore Similar Products
What Our Clients Say
Our Testimonial
The quality and durability of their bearings have exceeded our expectations, allowing us to maintain optimal performance in challenging environments
Rajesh K
Renewable Energy Company
The Inventum Induction Heater Model HIB-03 has been a valuable asset to a company's operations for over 24 years, providing exceptional performance, durability, and efficiency. The Inventum team's prompt response and professionalism have ensured minimal downtime and seamless operations. The recipient expresses gratitude for their exceptional product and expresses pride in their association with the brand, eagerly anticipating future opportunities to utilize their innovative solutions.
Bhagwan Prajapati
Hindalco Ind. Ltd.
popular questions
Frequently Asked Questions
Frequently Asked Questions serve as a valuable resource for providing quick answers to common queries.
