This ‘heavy-weight’ of Series HIB, has a power capacity of 11 kVA. It has the same controls as that of HIB-02,which are microprocessor based. It weighs about 87 kg. and is recommended to be placed on a Special EquipmentTrolley for easy mobility. It can heat typical bearings of 40 kg. and 52 kgs. to I I0°C in about 4 minutes and 8 minutes, respectively.
Product Data | Model HIB-03 |
---|---|
Heater Body | Outer casing body of these units is made from Impact Resistant FRP, and coated with special heat and scratch resistant PU Hard Coating. |
Power | 11 KVA |
Voltage | 2Ø x 440 VAC |
Nominal Current | 28 A |
Working Frequency | 50/60 Hz |
Residual Magnetism | < 2 A/cm |
Power Level | Variable & Step less, can be varied in steps of 1% also. |
Temperature Control | Up to 400° C using microcontroller based circuits, adjustable in steps of 1° C and accuracy +/- 5° C (Temperature accuracy +/-5° C for all models). |
Time Control | 0 to 99 min 59 sec. |
Minimum (ID)mm | 114mm (with standard horizontal yoke having role sliding arrangement) |
Sound Signal | Yes |
Reheat Signal | Yes |
Error Signal | Yes |
Digital Display | Yes |
Coil Over Heating Protection | Yes |
Temperature Hold Function | Yes, Provided |
Space between vertical supports (W x H) | 310 x 185 mm ( ± 10mm) |
Overall Dimensions (W x D x H) | 610 x 320 x 410mm (± 10mm) |
Standard Horizontal yoke size | 80 x 80 x 490mm(suitable for bore dia. 114mm & above) |
Weight (main unit) | 87 Kg |
Weight with Standard Yokes | 112 Kg |
OPTIONAL ACCESSORIES | - |
Horizontal Yoke size | 40 x 40 x 490mm(suitable for bore dia. 57mm & above) 50 x 50 x 490mm(suitable for bore dia. 71mm & above) 65 x 65 x 490mm(suitable for bore dia. 92mm & above) |
Special Equipment Trolley | 690 × 530 × 355mm |
Handheld Digital Thermometer | DT-01 (0 to 500° C) |