Welcome to Inventum: Engineers For Innovation

Heaters Products

HIBT-04 (4 kVA)

Inventum Induction Heater Model HIBT-04 is a Turbo Model. It is in the same range of Model HIB-01-SPL. The induction coil is placed outside of the housing which allows Faster Heating of the components. The heater is supplied with three standard yokes which are stored inside the main heater body.

TECHNICAL SPECIFICATIONS

Product Data Model HIBT - 04
Heater Body Robust all Steel Body
Power 4kVA
Voltage 1Ø x 230 VAC
Nominal Current 20 A
Working Frequency 50/60 Hz
Residual Magnetism < 2 A/cm
Power Level Variable & Step less, can be varied in steps of 1% also.
Temperature Control 0 to 400° C using microcontroller based circuit in steps of 1° C
Time Control 0 to 99 min 59 sec.
Minimum (ID)mm 20mm (with standard horizontal yoke)
Sound Signal Yes
Reheat Signal Yes
Error Signal Yes
Digital Display Yes
Coil Over Heating Protection Yes
Temperature Hold Function Yes, Provided
Space between vertical supports (W x H) 155 x 215 mm ( ± 10mm)
Overall Dimensions (W x D x H) 670 x 300 x 700 mm(± 10mm)
Standard Horizontal yoke size 55 x 55 x 310mm (suitable for bore dia. 78mm & above)
Weight (main unit) 41 kgs.
Weight with Standard Yokes 47 Kg
Core Section Sizes 55 x 55 mm
Coil diameter 110mm
Other Horizontal yoke sizes 30 x 30mm (suitable for bore dia. 43mm & above)
14 x 14mm (suitable for bore dia. 20mm & above)
Work piece :
Maximum weight
Maximum Bore Diameter

125 kg
20mm -400mm
OPTIONAL ACCESSORIES
Handheld Digital Thermometer DT – 01 ( 0 to 500° C )